Call Us

(646) 798-9759

Monday to Friday

8:00a.m. - 8:00 p.m

Saturday - Sunday

9:00a.m. - 8:00 p.m

Samsung Frame TV Installation Cost in NYC (2026 Guide)

A Samsung Frame TV is built to disappear into the wall when the art is on and the screen is off, but that illusion only holds up if the installation is right. Get it wrong and you’re left staring at a visible gap, a dangling cable, and a TV that reads like a TV instead of a piece of art. Frame TV installation cost in NYC typically runs higher than a standard TV mount, for specific reasons: a flush rail system with almost no tolerance for error, a separate cable box that has to hide somewhere, and buildings that rarely make either one easy. This guide breaks down exactly what drives the Frame TV wall mount cost, with real 2026 numbers for drywall, plaster, brick, and everything a fair quote should include.

Quick Answers

How much does Frame TV installation cost in NYC?

Most flush installs run $250 to $500, with full in-wall cable concealment adding $150 to $300 on top.

Does it cost more than mounting a regular TV?

Usually $50 to $150 more, mostly because of the zero-tolerance mount and the separate One Connect box.

Is the wall mount included with the TV?

Often, yes. Most current Frame TV models ship with Samsung’s flush mount already in the box.

Frame TV Installation Cost in NYC: The Honest Range

For a straightforward flush install on drywall, Frame TV installation cost in NYC runs $250 to $500. Add a tricky wall, full cable concealment, or a recessed cable box, and the total climbs well past $700. Here’s the range by scenario:

Installation scenarioTypical NYC price
Flush mount on drywall, basic cable dress$250 to $450
Plaster, brick, or concrete wallAdd $50 to $150
Full in-wall cable concealmentAdd $150 to $300
Recessed low-voltage box for the One Connect unit$600 to $1,200 or more
Above a fireplaceAdd $100 to $250
Soundbar mounted with the TVAdd $50 to $100

The number we see most often for a straightforward flush mount in a Manhattan apartment lands closer to $300 than $250, once a basic cable dress is factored in. For comparison, Angi’s New York-specific pricing puts standard handyman TV mounting at $100 to $300 flat, before any of The Frame’s extra requirements enter the picture. A Frame TV starts above that baseline because the panel has to sit dead flat against the wall, not because the labor takes dramatically longer. If you’re mounting a standard flat panel instead of The Frame, our TV mounting cost in NYC breakdown covers pricing by size and wall type.

What’s Actually Included in a Base Frame TV Install

A base flush install should cover four things: mounting the TV with a no-gap or slim-fit style bracket, positioning the One Connect box, dressing the visible cable run so it lies flat instead of hanging loose, and setting up Wi-Fi and Art Mode so the TV works the moment the installer leaves. Most current Frame TV models ship with Samsung’s own flush wall mount in the box, so hardware is often already paid for. If you need a replacement or want to upgrade to a motorized rotating mount for portrait artwork, expect $130 to $180 for Samsung’s official version, or $30 to $80 for a third-party option that gets close to flush without quite matching it.

What a base price does not usually cover: cutting into the wall to hide cables completely, masonry anchoring for brick or concrete, or building paperwork. Those show up as separate line items, and that’s exactly where quotes start to diverge from each other.

The Line Items That Move the Number

Wall type

Drywall over wood studs is the cheapest surface to work with and the fastest. Plaster and lath, common in prewar buildings, needs toggle anchors instead of standard ones, which adds time without adding much material cost. After enough plaster walls, the toggle step becomes routine, but it still stretches the job by 20 to 30 minutes. Brick and concrete need a hammer drill and sleeve anchors, and that’s where the real premium shows up. In a Tribeca loft converted from an old factory floor, anchoring into brick can add $50 to $150 to a job that would otherwise be routine. Renovated apartments with metal stud walls need their own approach, since standard anchors won’t hold a Frame TV’s weight properly; see mounting on metal stud walls if that’s your situation.

Cable concealment

There are three tiers. An external channel, painted to match the wall, is the cheapest option and still shows a faint line. In-wall concealment routes the cable through the cavity for $150 to $300 and leaves nothing visible on a hollow wall. A fully recessed low-voltage box, cut into the wall so the One Connect unit itself disappears, is the most involved option, and the one most quotes skip mentioning until you ask. It typically runs $600 to $1,200 or more once electrical coordination is included.

The One Connect box

This is the detail that separates Frame TV installation cost from a standard TV quote. Every input, HDMI, power, and the cable box, runs to a small separate unit instead of the back of the panel. Newer Frame models use Samsung’s nearly invisible connector cable, which helps, but the power cord and the box itself still need a home. A pattern that shows up on almost every Frame job: the client loves the flush screen, then asks, almost as an afterthought, where the One Connect box actually went. If you’re also running a new line behind the console for a streaming box or mesh router, home network installation NYC work is often bundled into the same visit.

Extras

A soundbar mounted with the TV adds $50 to $100, and pairing it with broader audio visual installation services is a common add-on for anyone building a home theater around the Frame TV. If you’re leaning toward a full Sonos setup instead of a single soundbar, our guide to pairing a Frame TV with Sonos speakers covers what that adds to the install. Removing and hauling away an old TV or mount typically adds a modest flat fee. Above a fireplace, add $100 to $250 for the extra height, angle, and heat clearance work.

What Frame TV Installation Cost Looks Like in a Prewar Manhattan Co-op

New York building stock changes this math more than almost anywhere else. Prewar apartments on the Upper West Side and in Chelsea often have plaster over wood lath, which is more forgiving than brick but still needs the right anchor system. Co-op and condo boards on the Upper East Side and elsewhere frequently will not let a vendor in the door without a certificate of insurance naming the building, and that paperwork has to happen before a drill ever comes out. Buildings with a freight elevator usually require a reservation window, which can push a same-day job to a scheduled one instead.

Renters have their own version of this math. A security deposit is on the line if wall repair looks sloppy, so a clean patch job matters as much as the mount itself. For the specifics on what building rules and lease terms say about wall repair, see our breakdown of NYC rental lease wall repair rules.

Here’s the honest caveat: if you’re in a small studio with a media console right under the TV and you don’t mind seeing a cable, a standard flush mount with an external channel gets you most of the look for less money. Full in-wall concealment matters most when nothing sits below the screen to hide the wire, which is often not the case in a studio layout.

Three Real Installs, Priced Out

The simplest job. A 55-inch Frame TV on drywall in a newer Upper East Side building. The mount was already in the box, the cable ran down to a console below, and Wi-Fi setup took ten minutes. Total: around $300.

The typical job. A 65-inch Frame TV in a prewar building with plaster walls. Full in-wall cable concealment, no visible One Connect box, and Art Mode configured for a rotating art library. Total: $450 to $600.

The complicated job. A 75-inch Frame TV on a brick accent wall in a converted loft, mounted above a low console with a recessed box for the One Connect unit and a certificate of insurance required by the building. Total: $900 to $1,300.

How to Read a Frame TV Installation Quote

A fair quote states the mount, the cable concealment level, and cleanup separately, so you know what you’re paying for each piece. Watch for these red flags:

  • A single flat number with no mention of wall type, given before anyone has seen a photo of your wall
  • No mention of whether the mount is included in the price or billed as hardware on top
  • Cable concealment listed as “included” with no detail on which of the three tiers that means
  • No insurance information offered when you mention a co-op or condo building

Cheap quotes on listing apps often exclude exactly the things that make a Frame TV install look right: the flush mount, the cable plan, and the cleanup. A low number that skips those isn’t really a lower price, it’s a different job.

What to Ask Before You Book

  • Does the quote include the wall mount, or is that priced separately?
  • Which cable concealment tier is included: external channel, in-wall, or recessed box?
  • Can you issue a certificate of insurance to my building’s management office?
  • Where does the One Connect box end up once the install is finished?
  • Is Art Mode and Wi-Fi setup part of the visit, or a separate step?

Before You Pick Up the Phone

The price range for Frame TV installation cost in NYC is wide because the job genuinely varies that much between a rental with a media console and a brick loft with a recessed box request. The fastest way to get an exact number is to send a photo of your wall and your TV size before you book, so the quote reflects your apartment instead of a national average. Samsung The Frame wall mounting NYC is one piece of Mounting NYC’s full-service AV work, and the crew supplies the mount and cable hardware in the same visit so you aren’t chasing separate vendors.

Get a firm price for your wall before you book anyone.

Frequently Asked Questions

How much does it cost to install a Samsung Frame TV?

In NYC, a flush install typically costs $250 to $500 on drywall. Full in-wall cable concealment adds $150 to $300, and a fully recessed cable box can push the total to $1,200 or more.

Is Frame TV installation more expensive than mounting a regular TV?

Yes, usually by $50 to $150. The mount itself demands more precision, and the separate One Connect box adds a step that standard TVs don’t have.

Does a Frame TV come with a wall mount?

Most current models ship with Samsung’s flush mount included. Some older models and larger sizes require buying one separately, which runs $30 to $180 depending on the brand.

How much does it cost to fully hide Frame TV cables?

In-wall concealment, where the cable runs through the wall cavity, typically adds $150 to $300. A fully recessed box for the One Connect unit costs more, usually $600 and up.

Where can I find reliable Frame TV installation near me in NYC?

Look for an installer who can supply the mount, explain cable concealment tiers clearly, and offer a certificate of insurance for co-op or condo buildings without being asked twice.

Have a wall in mind? Get a quote from Mounting NYC and find out your exact number today.

About Mounting NYC

Mounting NYC is a licensed and insured AV installation company serving New York City, offering TV mounting, Frame TV installation, smart home, and home theater services with same-day scheduling available. The team supplies equipment and handles installation in a single visit, and can provide a certificate of insurance to co-op and condo management offices before work begins.

Your Trusted Partner for Professional Mounting Services in New York City. Experience Excellence, Every Time.

Contact Links

Call Us

(646) 798-9759

Monday to Friday

8:00a.m - 8:00 p.m
Saturday - Sunday
9:00a.m - 8:00 p.m

Get In Touch With Us Today!

Contact Us
© 2026Mounting NYC | All rights reserved | Designed and developed by Hite Digital.
Call Now Button ; ;